SEN-AIN
Node+ Embedded
Sealed wireless temperature sensor for fridges, freezers and stores.
- LoRaWAN
- Temperature
Specs Datasheet
Products
The hardware, with the specs and datasheets
Every sensor, gateway and tracker we supply, fit and calibrate today. Each page has the key specs copied from the datasheet, the PDF to download, and what calibration it needs.
- Products
- 20
- Datasheets and drawings
- 11
- UKAS lab
- 10723
2 products
Temperature sensors
Sematics Node+ LoRaWAN sensors for fridges, freezers, cold rooms and stores. Accurate to ±0.1 °C, IP67, up to 4 years on standard AA lithium cells.
SEN-BEP
Node+ PT100
PT100 probe input for ultra-low freezers, tanks and medical fridges.
- LoRaWAN
- Temperature
- Door
Specs Datasheet
Have older sensors? We no longer sell Hanwell sensors, but we still support installed IceSpy, Pro and EMS systems, and plan the move to Sematics when you are ready.Legacy sensors
1 product
Temperature and humidity
Temperature and relative humidity from one digital probe, for pharmacies, labs and ambient stores.
SEN-CED
Node+ Digital
Temperature and humidity through an external digital probe.
- LoRaWAN
- Temperature
- Humidity
- Door
Specs Datasheet
2 products
Analogue and door inputs
Bring third-party CO₂, pressure and gas sensors onto Sematics, or watch doors on their own.
SEN-AEA
Node+ Analog
Brings 4 to 20 mA and 0 to 10 V sensors onto Sematics: CO₂, pressure, gas.
- LoRaWAN
- Analogue (CO₂, pressure, gas)
- Temperature
- Door
Specs Datasheet
Specs Datasheet
4 products
Probes and accessories
The probes, cables and door switches that plug into the Node+ range.
Specs Datasheet
AC-RHT
Temperature and humidity probe
SHT85 digital probe for the Node+ Digital.
- Wired to Node+
- Temperature
- Humidity
Specs Datasheet
AC-ANALOG
Analogue cable
Connects a third-party analogue sensor to the Node+ Analog.
- Wired to Node+
- Analogue (CO₂, pressure, gas)
Specs Datasheet
AC-DOOR-IND, AC-DOOR-2W
Door switches
Dry contact door switches for the Node+ range.
- Wired to Node+
- Door
Specs Datasheet
1 product
Bluetooth sensors
Small Bluetooth sensors that report through our vehicle and asset trackers.
SEM-BLE-Eye
Eye sensor
Bluetooth temperature, humidity, movement and door sensor.
- Bluetooth
- Temperature
- Humidity
- Movement
Specs Spec on request
1 product
Energy meters
A MID approved LoRaWAN energy meter that reads incoming supplies, refrigeration plant and other circuits through current transformers, onto the same Sematics dashboards as your temperatures.
SDM630MCT-LoRaWAN MID
SDM630MCT LoRaWAN
A MID approved 3-phase or single-phase energy meter that reads any circuit through CTs and reports over LoRaWAN.
- LoRaWAN
- Energy (kWh)
- Power demand
- Current
Specs Spec on request
1 product
I/O controllers
A LoRaWAN controller with digital, analogue, PT100 and serial inputs and two relay outputs, for door control panels and other equipment, reporting to Sematics.
UC300-868M
Milesight UC300
A LoRaWAN controller with digital, analogue, PT100 and serial inputs and two relay outputs.
- LoRaWAN
- Digital inputs
- Analogue and PT100
- Relay outputs
Specs Spec on request
5 products
Vehicle and asset tracking
GPS trackers and cameras for vans, trailers and containers, with load temperature from Bluetooth sensors.
OBD tracker
GPS tracker that plugs into the OBD II port in seconds.
- Cellular GPS
- Location
- Temperature (with Eye sensors)
- Door
Specs Spec on request
Installed tracker
Hard-wired tracker with inputs for ignition, doors and probes.
- Cellular GPS
- Location
- Temperature (with Eye sensors)
- Door
Specs Spec on request
Asset tracker
Battery tracker for trailers, containers and unpowered assets.
- Cellular GPS
- Location
- Temperature (with Eye sensors)
- Door
Specs Spec on request
FMC650
FMC650 tracker
GNSS tracker with ports for up to two vehicle cameras.
- Cellular GPS
- Location
- Temperature (with Eye sensors)
- Door
Specs Spec on request
Specs Spec on request
Measurement ranges
What each sensor reads, and what our lab calibrates
Our UKAS-accredited lab (10723) calibrates temperature from −90 to +135 °C, in the lab or on site. Humidity, CO₂ and pressure go to accredited partners.
Next step
Know what you need?
Tell us your sites, units and the services you want, and we'll send a written quote. If you'd rather talk it through first, call us.